My Brother Phills's 67 Mustang GTA
Delta 411 on the Web
Page 5
The project continues on and on and on
Drivers spring tower finally removed.
A good close up of a very nasty crack
Not exactly an example of fine workmanship
This was bent up during removal but wasn't hard cause it was cracked all the way across. This is the lower portion of the drivers side tower.
We are getting ready to clean up this frame section after the tower removal.
Well finally the front end is looking much better. I am getting ready to put the spring back in on the Passenger side.
After it seems like forever I have the drivers side almost finished. I am getting the drivers spring ready to install.
This sure looks 100% better after replacing all that damaged sheet metal.
You can see the bracket that the rack is going to be bolted to. The bracket had such a nice coating on it and cad plated fasteners we just couldn't paint it up at this time.
Finishing up the passenger side New everything all around.
\
Ready to put the last piece on the driver side and Phil jumps up and produces these shiny upper shock mounts and smiles while he says "Chrome will get me home"..
Return to Auto Shop
Back To Page 4